Self-paced familiarization for A320 maintenance engineers and technicians. You train inside the A320 SGP – Aircraft Engineer Integration app, not a recorded lecture or a PDF reader. Meet the time requirement set for your program and request your certificate directly from the app.
Want to learn more about the A320 SGP – Aircraft Engineer Integration?
Buy the A320 General Familiarization now
Aligned to EASA Part-66 type-rating groupings.
The A320 Aircraft Engineer Integration Familiarization Course includes:
Aligned with EASA Part-66 Appendix III Level 1 (General Familiarisation). Suitable for use in Part-145 continuation training when accepted within your MOE.
Certificate shows aircraft family and engine coverage (A318/A319/A320/A321; V2500/CFM56/PW1100G/LEAP-1A) and tracked study hours.
Course content is developed and reviewed by PAFAERO’s A320-experienced aircraft engineers for training accuracy and clarity.
Modern, interactive CBT for the Airbus A320 family. Study in VR or classic 2D. A certificate is issued when the required tracked study time is completed.
• Clear visuals and guided walkthroughs of the A320 family.
• VR or 2D on a standard PC.
• 30h tracked study time minimum.
• Distribution: Steam / direct installer.
For maintenance and airworthiness personnel who need A320 type awareness at Level 1 (General Familiarization) or a short Refresher used within Part-145 continuation training (MOE acceptance applies).
• Category C certifying staff
• Part-145 maintenance personnel and nominated/management staff
• B1/B2 technicians and engineers building A320 familiarity or bridging to type training
• CAMO and airworthiness review staff needing aircraft/engine familiarity
A318, A319, A320, A321 with CFM56, IAE V2500, PW1100G-JM, CFM LEAP-1A.
Issued after ≥ 30 hours of tracked active training in the A320 Study Guide Pro app.
Covers A320 CEO/NEO with four engine options. Time counts only while actively interacting.
Internet
This is a Level 1 General Familiarisation course per EASA Part-66 Appendix III. It does not grant CRS privileges and does not add an A320 type rating to an AML. Use within Part-145 competence/continuation training depends on your organisation’s MOE and competent-authority acceptance.
Red buttons open the CBT page for that component or system.
Arrow and target show each checklist station and item to inspect.
Same walkaround flow available with VR capability.
Move around the nacelle and open the related CBT notes via red buttons.
Water and waste CBT page
Yellow hydraulic system schematics
Pan and zoom; blue buttons open high-resolution views with info labels.
Explore cargo layout and access points with contextual buttons.
View RAT position and structure; open detailed images from hotspots.
Press any cockpit control to open its CBT page with functions and indications.
More than 400 interactive buttons and panels linked to explanations.
Press the PFD to open a page with each symbol described.
- General - Cockpit - Fuselage - Cargo compartments
Air conditioning:
- General - Air conditioning Pack - Fuselage - Zone temperature regulation
- General- Lavatory and Galleys- Avionics compartment- Cargo compartments
Ventilation:
- General
Pressurization :
- General - Power unit - APU systems
- General - Controls and indicating
- Passenger doors - Emergency doors - Cargo doors - Miscellaneous doors
- General- AC normal generation - AC emergency generation - Inverters- DC normal generation
- Cockpit crew oxygen system - Cabin oxygen system - Portable oxygen system
- General - Engine fire protection - APU fire protection - Others fire protection
- General- Control (pitch, roll and yaw) - High lift (flaps and slats)
- General- Tanks - APU feed - Pumps
- Slats and engines - Rain removal - Ice detection - Probes, windows and masts
- General- Main landing gear - Nose landing gear
- Cockpit lights - Emergency lighting - Exterior lights - Signs
- ADIRS - Landing and taxiing aids - Independent position system - Dependent position system
- General - Compressor module - Combustion section - Turbine section- Gearbox- Engine systems
- General - Engine bleed - APU bleed - Ground
- FDR - CVR
- General - System description - Pumps
- General - Lavatory and galleys - Avionics compartment - Cargo compartments
- Description
- General - Internal communications - External communications
Important
The SGP app combines several interactive modules that support engineer familiarization. It includes a Walkaround Simulator with Training and Exam modes, an Aircraft Exterior Guide with interactive buttons that open explanations or trigger animations, a Cockpit Guide to click a control and see its function, and an interior view of bays and compartments for orientation.
Please contact us for volume licensing, program-specific required time, branded certificates, or LMS integration.
After your purchase, you will receive the installation code via email immediately, allowing you to download and start learning right away.
Our software is only available in laptops or desktop (PC or Mac), if they meet the minimum required software.
The pafaero’s spftware is based on the official airbus documentation (FCOM, FCTM and AMM) and checked by our A320 captains and aircraft engineers.
All Pafaero´s software requires an internet connection.
The software can be installed once using your credentials, with one license allowing installation on a single computer. If you need to install it on multiple computers, additional licenses are required. For larger needs, we offer a bulk licensing option upon request.
All our software are developed for cadet and experienced users. It is not needed to have any experience on the field with the A320.When finished the PAFAERO’s courses, it is expected the user to involve to an advanced level.
The email with the installation code is typically sent immediately. If you haven’t received the confirmation email after 24 hours, please contact us at support@pafaero.com with your purchase ID.
14 days. The app shows your remaining window so you can plan your study time.
We regularly release updates to ensure our software remains up-to-date with the latest improvements and enhancements.
Prior to any release, we thoroughly test and quality-check each version to ensure stability and a bug-free experience for our users.
30 hours for the Familiarization course and 15 hours for the Refresh course.
The Certificate edition enables in-app eligibility and issuance of a completion certificate. Recognition by authorities depends on the approvals of the organization under which you enroll. The standard edition is a trainer only and does not issue a certificate.
Only when the app is open, in focus, and you are actively using it.
A certificate of completion for this course. Standard issuance is EASA. If you need issuance under another authority, ask us before purchase so we can confirm availability.
On request, and subject to partner approvals, certificates can be issued under: Iraqi CAA, Indian CAA, Libyan CAA, Pakistan CAA, and CAASL, in addition to EASA as standard.
No. It’s a completion certificate. If delivered under a partner Part-147 MTO, their Form 148/149 applies; otherwise it is suitable for awareness and may be used in Part-145 continuation training when accepted by your organisation.
No. Gen Fam is Level 1 awareness. Release privileges require the right AML category plus type rating training at Level 3 and, where applicable, OJT.
Any question or request for quotation, please contact us. Our support team will be in touch with you soon.
©2025 Privacy policy
This website uses cookies to ensure you get the best experience on our website.
