Black Friday Week – 20% off all home-use products

PAFAERO / Interactive systems training

A320 Family
Systems Simulator

Understand the system.
See the aircraft respond.

Operate cockpit and system controls within the simulator, change supported conditions, and follow the live response through dynamic schematics and ECAM indications — with Learning Mode explaining the system in context.

For pilots, technicians, engineers, students, instructors and training organisations.

Try the ATA 21 Demo Explore Access Options
For Organisations
PAFAERO simulator showing the pneumatic schematic, air-conditioning cockpit controls and BLEED ECAM indications together.
Inside the simulatorCockpit System ECAMCockpit selection System response Aircraft indicationView full image ↗
A320 Family coverage

A319 · A320ceo · A320neo · A321ceo · A321neo · A321LR · A321XLR

System configurations and applicable modifications vary by aircraft variant.

From theory to practical application

Connect the diagram
to the aircraft response.

Knowing the diagram is a start. Confidence grows when you can explain the response.

Manuals, presentations, CBT and approved technical data remain valuable references. PAFAERO adds an interactive layer: operate a control, follow the resulting configuration and repeat the interaction before practical aircraft exposure.

01 / Operate → Configure → Observe → Learn → Repeat

Make every interaction
a learning moment.

Contextual Learning Mode connects the component you are exploring to its function and current state.

Air conditioning pack schematic with Learning Mode explaining the compressor discharge temperature sensor and its current normal state.
ATA 21 / Learning Mode — component, function and current state.Inspect full image ↗
  1. 01

    Operate

    Interact with cockpit and system controls within the simulator.

  2. 02

    Configure

    Change supported modes, conditions and available failures.

  3. 03

    Observe

    Follow system logic through dynamic schematics and ECAM indications.

  4. 04

    Learn

    Use Learning Mode to explain components, relationships and the current state.

  5. 05

    Repeat

    Reset and revisit normal or abnormal scenarios at your own pace.

Available controls, modes and functions vary by system module and aircraft variant.

02 / Beyond the normal state

When a condition changes,
follow the consequences.

Explore an abnormal configuration, inspect the affected component and reason through what the system is showing you.

Electrical power distribution with TR 2 marked as failed and a contextual explanation showing fault active.
ATA 24 / Fault state with contextual learningInspect full image ↗

Instructor control

Set the condition.
Let the learner explain it.

Configure a supported failure, observe the response and reset to revisit the lesson.

Explore representative ATA 24 failure categories across generation and IDG, transformer rectifiers and batteries, distribution devices, and abnormal training presets. Additional system-specific failures and training conditions are available within the simulator.

Generation & IDG1 / 4
Click image to enlarge ↗

ATA 24 failure configuration

1 / 4
ATA 24 / Instructor controlView original image ↗

Try it yourself

ATA 21 Air Conditioning — Interactive Demo

Explore selected ATA 21 functionality in this intentionally limited public demo. The full Systems Simulator includes deeper system control, additional operating conditions, failures and module-specific training functions.

PAFAERO / ATA 21Limited public demo

ATA 21 interactive public demo

The limited interactive demo loads here on desktop or large tablet with JavaScript enabled. You can also explore the real simulator views on this page.

Simulator image · Preview only
Selected functionality · Full simulator access is separateDesktop or large tablet recommended

For the interactive experience, return on a desktop or large tablet. You can explore the product images and access options on this device.

Continue with the broader
A320 Family Systems Simulator.

Individual Access →For Organisations →

Beyond the public demo

One family.
Interactive systems training.

Across the available modules, the training approach is consistent: interact with the system, observe the aircraft response, understand the logic and repeat the scenario.

Available controls, modes and functions vary by system module and aircraft variant.

ATA 21
Air Conditioning
ATA 24
Electrical
ATA 27
Flight Controls
ATA 28
Fuel
ATA 29
Hydraulic Power
ATA 36
Bleed

A321XLR / ATA 28 Fuel

Operate the fuel system.
Follow the response.

The clip shows one A321XLR transfer sequence within a deeper interactive ATA 28 environment. Operate pumps, use simulator refuel/defuel controls and explore supported transfers and operating conditions — following the system logic and indications.

A321XLR configuration shown. Fuel-system configurations vary across the A320 Family.

Show what can be simulated

Where applicable to the module and aircraft variant, combine your inputs with dynamic schematic and indication changes:

  • Operate fuel pumps and observe the resulting system state.
  • Perform refuelling and defuelling using the simulator's refuel/defuel panel and controls.
  • Command supported fuel transfer between tanks and follow the resulting indications.
  • Simulate fuel-system behaviour in supported modes such as ground, takeoff and climb.
  • Observe automatic system logic responding to those conditions where supported.
A321XLR transfer / One recorded exampleView full clip ↗

Built around how you train

Your pace. Your teaching point.
Your training environment.

Students · Technicians · Engineers · Pilots

Build understanding at your own pace.

Return to a system, revisit a difficult interaction and become more familiar with the response before practical exposure.

Explore Individual Access →
  • Self-paced system exploration
  • Normal and abnormal practice
  • Repetition and refresher learning

Practical aircraft training remains essential. The simulator does not replace approved maintenance data or required practical training.

Choose how you will use it

For individuals.
For organisations.

For individual users

Individual Access

For students, technicians, engineers and pilots building their own system understanding.

  • Self-paced exploration and refresher learning
  • Normal and abnormal practice
  • Contextual learning and repeated interaction
Purchase Individual Access

Purchase Individual Access through the PAFAERO store.

Purchase Individual Access →

For instructors and organisations

Organisation Access

For instructors, training schools, Part-147 organisations, airlines and MROs using the simulator for classroom, self-study or recurrent training.

  • Instructor-led cause-and-effect demonstrations
  • Classroom teaching and student self-study
  • Licensing and deployment for your training environment
Contact PAFAERO

Tell us how you plan to use the Systems Simulator and we will help you with the appropriate licensing and deployment setup.

Contact PAFAERO →

A320 Family Systems Simulator

Understand. Practise. Apply.

Try the ATA 21 Demo ↗
Shopping cart0
There are no products in the cart!
Continue shopping
0